Basic Info.
Lightning Protection
With Lightning Protection
Certification
ISO, RoHS, CE
Installation Type
Indoor, Home Use
Technic Advantage
Alc&Agc
Advantage
Automatic and Manual Control Gain
Mgc ( Step Attenuation )
≥ 31db / 1db Step
Band Width (-3db)
Wide Band
Environment Conditions
IP40
Power Supply
Input AC90~264V,Output DC10V / 7A
Specification
CE ROHS ISO
Product Description
Features:
1.The consumer repeater is an ideal solution for providing a cost effective improvement in cellular in-building coverage of a home, office, restaurant or building, in the quickest time possible.
2.Manual gain control (MGC) available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance
3.To maintain safe and specific output signal levels and give alarms on self-oscillation, the repeater has built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.
4.Auto shut off function available for both uplink and downlink to avoid deep self-oscilation from jamming the towers, saving your trouble from operators.
5.Multiple phones and other handheld devices throughout a building can benefit from a wireless repeater.
6.Supports up to (600) users / calls simultaneously.
7.Extended phone battery life. (Your phone does not need to put out as much power due to improved reception.)
5. Low power consumption.
We can make all kinds of frequencies:
Such as for indoor single band intelligent repeater : GSM900,GSM1800,GSM1900M, CDMA, LTE,IDEN,WCDMA2100 etc.
For dualband and tri-band intelligent repeater : GSM/DCS 900/1800MHZ dualband, GSM/3G 900/2100Mhz dualband repeater, 900/1800/2100MHZ triband Repeater etc.
Outdoor series: Fullband repeater, band selective repeater, frequency selective repeater, frequency shifting repeater etc.
Electrical specification | Uplink | Downlink |
Frequency Range | GSM | 890-915MHz | 935-960 MHz |
DCS | 1710-1785MHz | 1805-1880MHz |
WCDMA | 1920 ~ 1980 MHz | 2110 ~ 2170 MHz |
Max .Gain | ≥75dB | ≥75dB |
Max .Output Power | ≥20dBm | ≥27dBm |
Bandwidth | GSM | 25MHz |
DCS | 75MHz |
MGC(Step Attenuation) | 31dB / 1dB step |
Automatic Level Control | | ≥ 15dB, auto shut off after15dB |
Gain Flatness | GSM | ≤ 6dB |
DCS | ≤ 8dB |
WCDMA | ≤ 2dB/ 3.84MHz,Full Band≤ 5dB(P-P) |
Itermodulation | Meet ETSI TS 151 026 |
Spurious Emission | Meet ETSI TS 151 026 |
Noise Figure | ≤ 6dB |
V.S.W.R | ≤ 2.0 |
Group Delay | ≤ 0.5μs |
LED Alarm | Standard |
Power LED | Power Indicator |
ALC LED | Orange @ ALC 1~5dB, Red @ ALC 15dB~20dB; LED off after 5 seconds red color |
Mechanical Specifications | Standard |
I /O Port | N--Female |
Impedance | 50 ohm |
Operating Temperature | -10ºC~+40ºC |
Environment Conditions | IP40 |
Dimensions | 250*400*104mm |
Weight | ≤8.5KG |
Power Supply | Input AC90~264V,output DC9V /10A |
1. Safety Warnings
Users must follow the below principles:
l Repeater should follow system requirement of communication equipment, assure good
grounding and lightning protection.
l The power supply voltage of repeater should meet the standards of security requirement; any
operation shall be carried out only after cutting off power in advance. Only the professional is authorized for the operation.
l Do not dismantle machine, maintain or displace accessories by yourself, because in this way, the equipment may be damaged and you may even get an electric shock.
l Do not open the repeater, touch the module of repeater, or open the cover of module to touch the electronic component. The components will be damaged due to electrostatic.
l Please keep away from heating-equipment, because the repeater will dissipate heat during
working. And do not cover booster with anything that influences heat-dissipation.
1. Introduction
Our fullband repeater (including 10dBm, 13dBm, 15dBm, 20dBm, 23dBm, 27dBm, 30dBm, 33dBm) is the perfect solution for providing a wireless improvement in the cellular reception of a home, office, restaurant, VIP Room, apartment, building or shopping mall, in the quickest time possibly. One repeater covers 50 to 4000 square meters.
This repeater has Manual Gain Control (MGC) feature that enables engineers to reduce the gain of the repeater
manually if oscillation is detected or too strong input power level during installation, which will help to get the best coverage effect without any interference back to mobile network.
And in order to maintain safe and specific output signal levels, this repeater has built-in signal oscillation detection circuit to adjust the gain automatically so as to avoid interference to the cellular network, also it gets color changing LED's indicating its environmental status: the Alarm LED's located on the front of the unit will change color from green to orange or red, (depending on the input power level) if the system detects signal oscillation in either band or, if the input signal is beyond a safe limit.
Our repeaters also feature a Network Safe / MUTE feature that automatically shuts off the repeater to protect the cellular network if no adjustments are made to eliminate alarm readings on the repeater's LED's. You will want to make sure the LED's remain green at all times for optimum system performance. (This function is not available for some specific models for which we will specify when you purchase)
Below diagram shows how simple and fast repeater system(including 10dBm, 13dBm, 15dBm, 20dBm, 23dBm, 27dBm, 30dBm, 33dBm) is installed and works effectively
One Yagi antenna, as donor antenna, is installed at the top of the roof to pick up good mobile signals from outside, and send through 5D-FB or 3D-FB cable to repeater to amplify the signals significantly, then the output signals are divided into two signals by 2-way splitter, sent to two indoor omni antennas and finally transmitted into area. Very clear phone call or high speed mobile data are immediately achieved within the area.
Manual Gain Control (MGC)
Switches 1-5 represent Downlink and 6-10 represent Uplink. When it is necessary to adjust the gain by DIP switch, firstly please adjust Downlink gain according to input signals, secondly please adjust Uplink gain according to Downlink gain.
The DIP Switches have default 'OFF' status; please push relevant switches to "ON" position if certain attenuation value needs to be achieved.
Address:
86#, Hou Ting, Number Two Industrial District, Sha Jing, Bao an District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics
Management System Certification:
ISO 9001
Company Introduction:
Gainer International (China) Limited is a professional enterprise which specialized in wireless communication products, customer electronics products. We are highly developing enterprise, with CE certificate and GB/T19001-2008 /ISO 9001: 2008. We spare no effort to provide good products and service for customers all over the world.
We mainly produce signal repeater, booster of GSM, CDMA, DCS, WCDMA, IDEN, LTE CDMA450M, also other correlative products. We manufacture products by our own R&D team which was formed by experienced exports in related fields. Our design and manufacture can follow customers′ special requirements.
We dedicate to provide the most satisfactory services for our customer. We aim to provide more competitive products and meet the needs of high-speed developing market.
Our products have been sold to the worldwide markets like USA, Italy, the Netherlands, New Zealand, France, Switzerland, Ireland, Russian, Spain, Poland, UK, South Africa, Brazil, Mexico, Saudi Arabia, Jordan, Indonesia, Malaysia, India, UAE, Iceland, Australia, Czech Republic, Kyrgystan, and more.
We ensure to offer the best quality and the lowest price to help you to develop your market, Hope to built up long term business relation with you.
Cooperate with Gainer International, you will be the gainer of the world, we are waiting for you!